Your numbered design

Your numbered design

Single layered hologram numbered by a laser

Numbering individual holographic etiquettes is one of the strong safety instruments by which you can label your own designed holograms. Apart from numbers in the indentification chain there can also be any alphanumercial signs, the format of series number is given by your choice. Labeling on the hologram can represent either the production number of a product or the number of a contract, enrollment, allowance etc. in case of securing documents, contracts or forms. The initial number of the seal will be set according to your requests and will be used for already progressing chain of documents and series numbers of creating products. It does not have to start by number 1. One of the options for printing identification number on the self-adhesive label is implementing these smybols to separated holographic layer. To a single layered graphical predesign another independent layer containing a series number or other identification signs is added. These are burnt in metallic layer – a carrier of holographically visualized graphical information. This layer is covered by a top film layer creating the top of a holographic etiquette just as the first layer. This solution is the cheapest option of seals numbering but it does not have to be suitable for some purposes because the series number itself shows visualizing characteristics of a holographic drawing. It does not have to be greatly readable in all lightning conditions, let us say it is readable always and greatly but only after a right rotation towards the light source. That is no problem at all when we take objects that can be grabbed and rotated. However, there can be a problem of recognizing of a series number from the holographic layer with bigger static products or their components which can , in addition, be worse accessible and there is a worse possibility to greatly enlight them. For these kinds of applications we recommend to look thourgh the options that are offered by a printing of identification signs with the help of screen printing.



It is not possible to number self-adhesive labels smaller than 10 x 10 mm (or diameter of 10 mm) because of technological reasons. Minimal parameters of customers’ numbered holograms is limited to 1 cm.

Informative price list of 2D self-adhesive labels numbered by a laser to maximal parameteres of 2 x 2 cm, no VAT inc.
1 000 pieces £284 £0.28  /pc
2 000 pieces £349 £0.17  /pc
5 000 pieces £402 £0.08  /pc
10 000 pieces £528 £0.05  /pc
50 000 pieces £731 £0.01  /pc
100 000 pieces £1178 £0.01  /pc

    

Example produced hologram

Documents for production

colors and materials

Two layered hologram numbered by a laser

We offer 2 methods of priming your produced series of labels not only with texts or graphical signs like logos or emblems, but also with a series number. One of the options is to create a layer that will contain this number and continue in the method of multilayered hologram production. Numbering will be secured automatically when producing and it is not necessary to deal with it when designing. Of course, this method is only usable when there is one free layer for numbering. On the other hand, it is convenient to include the series number into one of the layers when you do not want to disturb the graphical motives of a logo – this identification number is therefore not that visible and will not look disturbingly.



It is not possible to number self-adhesive labels smaller than 10 x 10 mm (or diameter of 10 mm) because of technological reasons. Minimal parameters of customers’ numbered holograms is limited to 1 cm.

Informative price list of 2D two layered self-adhesive labels numbered by a laser to maximal parameteres of 2 x 2 cm, no VAT inc.
1 000 pieces £325 £0.33  /pc
2 000 pieces £386 £0.19  /pc
5 000 pieces £488 £0.10  /pc
10 000 pieces £650 £0.07  /pc
50 000 pieces £853 £0.02  /pc
100 000 pieces £1463 £0.01  /pc

    

Example produced hologram

Documents for production

colors and materials

Single layered hologram numbered by a termotransfer impress

Termotransfer printing is another option of numbering used when all layers are taken by the graphics or texts. It is applied into the top part of a produced hologram in a colour you choose. If it is important for you to always quickly and reliably read the series number of the seal, screen printing is recommended. Of course, termotransfer printing is readable even in bad lightning conditions and under any angle.



It is not possible to number self-adhesive labels smaller than 10 x 10 mm (or diameter of 10 mm) because of technological reasons. Minimal parameters of customers’ numbered holograms is limited to 1 cm.

Informative price list of 2D single layered self-adhesive labels numbered by a laser to maximal parameteres of 2 x 2 cm, no VAT inc.
1 000 pieces £284 £0.28  /pc
2 000 pieces £349 £0.17  /pc
5 000 pieces £402 £0.08  /pc
10 000 pieces £528 £0.05  /pc
50 000 pieces £731 £0.01  /pc
100 000 pieces £1178 £0.01  /pc

    

Example produced hologram

Documents for production

colors and materials

Two layered hologram numbered by a termotransfer impress

Technology of termotransfer printing can be used for all your designed self-adhesive labels. It does not matter how many holographic layers it has or what kind of self-adhesive media it contains. It is also possible to choose tamper-evident self-adhesive films (labels with selective unsticking) for a combination with screen printing. Method of termotransfer (same as with screen printing) is used for adding information to holographic material – mostly series numbers, labeling type of a product, production number, year of production or imposed year of checkup, labeling of the origin etc. Termotransfer technology in connection with holographic safety salef-adhesive seal brings many advantages:

1. Termotransfer printing will be done in any by you chosen colour.

2. Applied colour is not a holo layer and therefore does not carry visual effects of a hologram, text is readable under any angle and that is an advantage for the series number.

3. Impress is put on the top of the translucent film and does not interfere with other holograhic layers you designed. It is another independent layer usable for making a design of your safety label. Termotransfer printing together with two layered numbered seal represents a four layered safety item with a high degree of inability to falsificate.



It is not possible to number self-adhesive labels smaller than 10 x 10 mm (or diameter of 10 mm) because of technological reasons. Minimal parameters of customers’ numbered holograms is limited to 1 cm.

Informative price list of 2D two layered self-adhesive labels numbered termotransfer to maximal parameteres of 2 x 2 cm, no VAT inc.
1 000 pieces £325 £0.33  /pc
2 000 pieces £386 £0.19  /pc
5 000 pieces £488 £0.10  /pc
10 000 pieces £650 £0.07  /pc
50 000 pieces £853 £0.02  /pc
100 000 pieces £1463 £0.01  /pc

    

Example produced hologram

Documents for production

colors and materials