Two layered numbered holograms made in advance

Two layered numbered holograms made in advance

Universal self-adhesive two layered labels furnished by a unique series number. Eventual copying of two layered graphical hologram blueprints is more complicated and therefore its level of security is higher. These numbered labels are in sufficient number in our storage always. Thanks to the unique number of each hologram its security level highly increases because there will not be sold any seal with the same serial number ever. For low production costs you get security holographic item that reaches levels of security of holograms made by an order in some aspects even though it is sold in series.


Two layered numbered seal with screen printing on VOID basis

In-store holographic etiquette with parameters of 70 x 22 mm wth rounded corners combines a few security items sucha s 2 holographic layers, numbering, screen printing and VOID basis. Thanks to the unique number of each hologram its security level highly increases because there will not be sold any seal with the same serial number ever. VOID basic layer that is used - „Void evident film“ shows increased responsivity to attempt to unautorized unsticking and reacts by a specific damaging of metallic layer – uncovering of square raster 3 x 3 mm. In one holographic layer there are 2 graphical emblems in circle and bordered series number and in the second holographic layer there is a repeating word „SEAL“ in 2 sizes underneath each other in raster. The main colour of this hologram is silver. There is a sign of a seal with ribbons screen printed in red from the top.


Second picture ilustrates what happens when this hologram is unsticked. You can see intact hologram sticked to the surface at the top picture. Then you can see 2 separated parts which are separated when the label is unsticked – the basal part remains sticked to the surface and the top part with the film has fully evident signs of unsticking even though it doesnt lose its sticking attributes and can be sticked to another place. This attribute is usable when labeling exploitation, the end of validity, marking used sale voucher etc.


Parameters of this seal are 70 x 22 mm. These holographic labels with series number are available in our storage all the time and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  £0.14 no VAT inc.

Price for 100 and more pieces:  £0.11 no VAT inc.


   
    

A two – layered numbered sticker with a VOID layer and a high level of adhesiveness

This two-layered destructive holographic sticker has an increased security against falsification thanks to a guilloche pattern in one of the holo layers. The second improvement is provided by a three-layered glue that highly increases the adhesiveness and it is possible to use it on rough surfaces where the standard thickness of the glue is not able to secure the continual adhesiveness of the sticker.

The adhesiveness is demonstrated on a sporadically structured plastic surface. You can see a comparison with a made in advance single-layered security seal which also obtains a VOID layer but has a standard thickness of glue. At the top you can see an attempt of removing and re-pasting, at the bottom you can see the remnants after removing the hologram.

Every one of these holographic stickers has its own unique series number that will never repeat itself in any other order and there are no stickers with the same series number. For securing even higher security the hologram is produced on a VOID basis, meaning on a special film that increases the sensitivity against the removing attempts, removing and re-pasting the sticker on a different product. This self-adhesive media is made so that it is clearly visible when someone tries to remove it. When trying to remove the sticker it gets visibly damaged. After removing the sticker it leaves a clearly readable text „VOID“on both the surface of a film and also the place it was paste to. The sticker contains security words “PROTECTIVE LABEL” which increases its flexibility of applications and usage.

Apart from the above mentioned words this label also contains a seven-figured identification number. In the basis layer there is a guilloche which has two functions – increasing the security against falsification and having also the decorative function it multiplies the rainbow holographic effects when the seal is exposed to light. The removing and re-pasting of a sticker is disabled by a VOID production technology and supported by a stronger layer of glue. When removed, the label gets damaged and „VOID“text is revealed as you can see in the picture.

The size of this seal is 45 x 17 mm, the corners are round. These numbered VOID stickers are available in our store all the time and you can order them anytime in the minimum of 1 piece and up.


Price for 1-100 pieces:  £0.09 no VAT inc.

Price for 100 and more pieces:  £0.07 no VAT inc.


   
    

Two-layered numbered sticker with a VOID layer for social occasions

This two-layered numbered holographic sticker is reliable and neat way of securing the entry tickets from falsification. Motive of a dancing couple predestinates the hologram application for the entrance tickets to social occasions, especially those taking place in a gala season. The entrance tickets to the gala/event events organized by various voluntary organizations, schools, etc. are typically printed by normally available laser printers and many times lack the basic security items. If you take into consideration the number of participants, security and the safety of the events preventing any falsification becomes quite important.

By simply pasting this type of a hologram onto the ticket printed on a normal laser printer you increase the level of the security of the entrance ticket to its minimal sufficiency. The importance of this security results from the unique number code of each sticker and is used as identification when the uncertainties occur because of the number given to each ticket.

Hologram for securing the event/gala tickets, seat reservation tickets and vouchers is thematically equipped in one layer by a motive of a dancing couple with a decorative guilloche. In the second layer there is a periodically repeated base made of words „ORIGINAL“of two different sizes. The consecutive serial 5-digit numbering is printed on the left side of a dancing couple in the middle of the guilloche.

The VOID basic layer „Tamper Evident Film“ used shows an increased sensitivity to the attempts of unauthorized removal and reacts by a specific bearing metallic layer damaging – revealing the word VOID. You can see the illustration of a division of the silver layer in the photograph. The text made of VOID words is revealed in the area where the sticker was pasted to and the rest of the silver area stays alone on the sticker (shown on the right side of the picture).

The diameter of this hologram is 13 mm. These holographic certificates (labels) are available in our store all the time and you can order them anytime in the minimum of 1 piece and up.



Price for 1-100 pieces:  £0.07 no VAT inc.

Price for 100 and more pieces:  £0.04 no VAT inc.



   
    

Two-layered numbered VIP Hologram security sticker


Security hologram " Very Important Person ", is intended mainly for VIP tickets and invitations for important people and important guests , has unusual shape with 13 corners for maximum visual emphasis. Stickers are available on silver and gold film in a double row of numbers. Silver have five-digit numbers with prefix " A" and the gold of the prefix "B". Baseline use of this sticker is based on the same philosophy as that described in the seal for social occasions with an emphasis on the possibility distinguish it from the standard service offers. We recommend The holograms for all section in the relationship with VIP such as , VIP Zone , VIP , VIP client but also the phrase as GOLD member , GOLD zone or PLATINUM zone PLATINUM client , PLATINUM member or in connection with words or PREMIER EXCLUSIVE.

Both versions of stickers have the same format ,in the rectangle of size 19x18mm.The letters used to write the word "VIP" have a height of 4 mm. In background of the hologram is a grid of regular hexagons with the letters " V ", " I ", " P ".

This holographic stickers are always available and you can always order from one piece.


Price for 1-100 pieces:  £0.11 no VAT inc.

Price for 100 and more pieces:  £0.09 no VAT inc.

Price for 500 and more pieces:  £0.07 no VAT inc.


   
    


Small circular numbered holographic seal „Original“

Each holographic seal has a unique series number which will not repeat in any other order, there are no seals with the same series number. Self-adhesive label contains title „SECURITY protection“ and as a blueprint in basal holo layer raster from the word „Original“. Circular seal has 3 holographic layers. The third layer is series number of five.


Parameters of the seal are given by a diameter of a 10 mm circle. These holographic pasters with series number are available in our storage all the time and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  £0.07 no VAT inc.

Price for 100 and more pieces:  £0.05 no VAT inc.


   
    

Large circular numbered holographic seal „Original“

Each holographic seal has a unique series number which will not repeat in any other order, there are no seals with the same series number. Self-adhesive label contains title „SECURITY protection“ and as a blueprint in basal holo layer raster from the word „Original“. Circular seal has 3 holographic layers. The third layer is series number of five.


Parameters of the seal are given by a diameter of a 20 mm circle. These holographic pasters with series number are available in our storage all the time and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  £0.09 no VAT inc.

Price for 100 and more pieces:  £0.07 no VAT inc.


   
    

Small square numbered holographic seal „Original“

Each holographic seal has a unique series number which will not repeat in any other order, there are no seals with the same series number. Self-adhesive label contains title „SECURITY protection“ and as a blueprint in basal holo layer raster from the word „Original“. Square seal has 3 holographic layers. The third layer is series number of five.


Parameters of the seal are 10 x 10 mm. These holographic pasters with series number are available in our storage all the time and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  £0.07 no VAT inc.

Price for 100 and more pieces:  £0.05 no VAT inc.


   
    

Large square numbered holographic seal „Original“

Each holographic seal has a unique series number which will not repeat in any other order, there are no seals with the same series number. Self-adhesive label contains title „SECURITY protection“ and as a blueprint in basal holo layer raster from the word „Original“. Square seal has 3 holographic layers. The third layer is series number of five.


Parameters of the seal are 20 x 20 mm. These holographic pasters with series number are available in our storage all the time and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  £0.09 no VAT inc.

Price for 100 and more pieces:  £0.07 no VAT inc.